215333
179
Revision A
1024791
A
Figure 4.98: R113 PT Cutterbar Accelerators
1024907
A
Figure 4.99: R116 PT Cutterbar Accelerators
5.
Inspect accelerators (A) for damage and wear, and replace
if worn to 50% or more of their original height or if they are
no longer effectively moving crop.
6.
Tighten or replace loose or missing fasteners.
Removing Accelerators
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove key, and
engage lift cylinder lock-out valves before going under machine for any reason.
IMPORTANT:
Always replace accelerators in pairs to ensure proper disc balance.
1.
Raise the header fully.
2.
Shut off the engine, and remove the key from the ignition.
3.
Engage lift cylinder lock-out valves. For instructions, refer to
.
