![background image](http://html1.mh-extra.com/html/macdon/m2170/m2170_unloading-and-assembly-instructions_4377466263.webp)
262175
255
Revision A
Predelivery Checklist
Perform these checks and adjustments prior to delivery to your Customer. Complete this checklist and provide it to the
Dealer or the Operator.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to hazards and
unsafe practices.
Windrower Serial Number:
Engine Serial Number:
M2170 and M2260 Windrower Predelivery Checklist
ü
ü
Item
Reference
Check for shipping damage or missing parts. Ensure that all
shipping material has been removed.
—
Check for loose hardware. Tighten any loose hardware to the
specified torque value.
6.4 Torque Specifications, page 243
Check the pressure level of the drive and caster tires. Ensure
that the pressures matches the specified values.
4.1.13 Checking Tire Pressure, page 64
Check the lubricant level in the wheel drive hubs.
4.1.11 Checking and Adding Wheel Drive Lubricant
or
Check the level of the engine coolant.
4.1.6 Checking And Adding Engine Coolant, page 54
Check the engine air intake.
4.1.2 Checking Engine Air Intake, page 50
Check the level of engine oil. Ensure that there are no engine
oil leaks.
4.1.3 Checking and Adding Engine Oil, page 51
Check the level of hydraulic oil. Ensure that there are no
hydraulic fluid leaks.
4.1.4 Checking and Adding Hydraulic Oil, page 52
Check the fuel separator for water and foreign material.
Drain and clean the fuel separator as needed.
4.1.5 Checking Fuel Separator, page 54
Check level of lubricant in the gearbox.
4.1.7 Checking Engine Gearbox Lubricant Level and
Adding Lubricant
or
4.1.8 Checking Engine Gearbox Lubricant Level and
Adding Lubricant
Ensure that the air conditioning compressor belt is properly
tensioned.
4.1.9 Checking Air Conditioning Compressor Belts,
page 57
Ensure that the operator presence system is working
properly.
4.2.1 Checking Operating Safety System, page 70
Ensure that the horn is working properly.
Start the engine. Allow the engine to reach operating
temperature. Perform the Operational Checks listed below.
4.1.10 Starting Engine, page 58
Ensure that the fuel and diesel exhaust fluid (DEF) gauges on
the HarvestTouch
™
Display work properly.
Ensure that the engine speed is displayed correctly on
the HarvestTouch
™
Display.
4.2.8 Checking Engine Speed, page 81
Ensure that selective catalytic reduction (SCR) conditioning
inhibit is turned off.
4.2.9 Checking Selective Catalytic Regeneration
Conditioning Mode, page 82
Содержание M2170
