![background image](http://html1.mh-extra.com/html/macdon/m2170/m2170_unloading-and-assembly-instructions_4377466177.webp)
262175
169
Revision A
24. Proceed as follows:
•
If you are attaching the header to an M2170 Windrower:
5.4.3 Connecting R2 Series Rotary Disc Header Hydraulic
•
If you are attaching the header to an M2260 Windrower:
5.4.4 Connecting R2 Series Rotary Disc Header Hydraulic
5.4.3
Connecting R2 Series Rotary Disc Header Hydraulic and Electrical Components
–
M2170 Windrower
Connecting the header hydraulic and electrical systems to the windrower involves attaching the header
’
s knife drive,
pressure, return, case drain, and electrical connectors to the windrower
’
s receptacles.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
CAUTION
Do NOT stand on an unlocked platform. It is unstable and may cause you to fall.
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all (fixed and
movable) hydraulic couplers.
1.
Shut down the engine, and remove the key from the ignition.
1015479
A
B
Figure 5.159: Left Platform
2.
Approach platform (A) on the left side of the windrower.
Ensure that the cab door is closed.
3.
Push latch (B) and pull platform (A) toward the walking
beam until it stops and the latch engages.
Содержание M2170
