![background image](http://html1.mh-extra.com/html/macdon/m2170/m2170_unloading-and-assembly-instructions_4377466126.webp)
262175
118
Revision A
5.2
D2 SP Series Draper Header
To attach the header to the windrower, follow the procedures provided here in the order presented.
5.2.1
Attaching Draper Header Supports
The draper header supports are required to attach the header to a windrower.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
B
C
ϭϬϰϮϰϯϭ
A
Figure 5.48: Draper Header Supports
IMPORTANT:
Ensure that the correct header supports are used:
•
D2 SP Draper Headers must use header supports (A).
•
A feature that distinguishes support (A) from all other types
is that rubber block (B) is attached to the support using
pin (C).
•
To order header supports, refer to the header parts catalog.
1.
Shut down the engine, and remove the key from
the ignition.
ϭϬϯϴϱϭϬ
A
B
C
Figure 5.49: Draper Header Support
2.
Remove hairpin (A) from clevis pin (B) on draper header
support (C). Remove clevis pin (B).
Содержание M2170
