215794
43
Revision A
4.5
Checking Engine Air Intake
The air intake system must be inspected to ensure air intake components have been installed and tightened correctly.
ϭϬϯϴϬϱϭ
A
B
C
Figure 4.6: Air Intake System
1.
Ensure clips (A) are properly latched, and that plenum
box (C) is securely attached to cover (B).
Checking constant torque gaps:
1007580
A
B
Figure 4.7: Constant Torque Clamp
2.
Check each of the constant torque clamps referenced in
Step
and Step
as follows:
a.
Check spring coil gap (A) on the constant torque clamp
by holding a 0.46 mm (0.018 in.) gauge between
middle coils (B)
b.
Tighten the clamps until the gauge is snug, and remove
the gauge.
1007583
A
B
C
Figure 4.8: Air Intake System
3.
Check four constant torque clamps (A) (two at air intake
duct [B] and two at turbocharger tube [C]).
NOTE:
Some parts have been removed from the illustration for
clarity.
