215627
28
Revision A
3.6
Installing Windshield Access Step
The windshield access step is secured on the railing of the right cab-forward side platform.
$
%
Figure 3.32: Step in Shipping Position
1.
Remove windshield access step (A) from the shipping
location on the right platform. Remove packing
materials (B) from the step and railing.
2.
Retrieve three self-tapping screws from a bag in the
toolbox.
NOTE:
Use the ignition key to unlock the toolbox compartment.
$
&
%
Figure 3.33: Windshield Access Step Installed
3.
Position step (A) on the right cab-forward leg at the
forward end of the platform as shown.
4.
Install two M10 x 20 hex head screws (B) through the top of
the step. Do
NOT
tighten the hardware yet.
5.
Install one M10 x 20 hex head screw (C) through the step
support.
6.
Tighten the screws and torque them to 57 Nm (43 lbf·ft).