Lowering Caster Wheel
1. Raise the end of walking beam (A) slightly, using
a suitable lifting device capable of lifting minimum
2268 kg (5000 lb.).
2. Remove the jack stand, and lower the end of the
walking beam until the caster wheel assembly (B) is
on the ground.
3. Remove blocks from the drive tires.
Figure 5.195: Caster Wheel Assembly
Removing Forked Caster Wheel
CAUTION
Wheel assemblies are heavy.
Support wheel
assembly before removing axle bolts.
1. Raise caster wheel. Refer to
.
2. Remove the eight bolts (A) and nuts (four of each
on each side of caster) attaching axle (B) to forked
caster (C), and remove wheel assembly (D) from
caster (C).
Figure 5.196: Caster Wheel Assembly
3. Remove the eight wheel nuts (A) that secure the
axle (B) to the wheel (C).
4. Separate axle (B) and wheel (C).
Figure 5.197: Caster Wheel Assembly
214053
351
Revision A
Содержание M1240
