Replacing Beacon Lights
1. Disconnect wiring (A) from harness.
2. Remove nuts (B) and remove beacon (C). Discard
defective beacon and hardware.
3. Clean residue from support (D) mounting surface.
4. Install new beacon (C) with gasket (E) onto support.
Secure with bolts (F), washers (G), and nuts (B).
5. Torque nuts to 0.65 N
·
m (0.48 ft
·
lbf)
Figure 5.163
Replacing the Cabin Dome Bulb and Light Assembly
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
1. Shut down the engine and remove the key.
Replacing dome light bulb:
2. Insert a slotted screwdriver (or similar prying tool)
into slot (A). Gently pry the lens cover until retaining
tabs (B) are free of the dome light bezel.
3. Remove lens cover.
Figure 5.164: Cabin Dome Light
214053
333
Revision A
Содержание M1240
