4. Park the windrower on level ground.
5. Press the header raise button (A) on the ground speed
lever (GSL). When the header reaches maximum
height, continue to hold the header raise button
momentarily to allow the lift cylinders to rephase.
Figure 4.185: GSL
6. Lower the header to approximately 150 mm (6 in.) off
the ground.
7. Ensure that member (A) is against link (B).
8. Stop the engine and remove the key from the ignition.
9. Measure the distance to the ground at both ends of the
header to determine if the header is level.
Figure 4.186: Lift Linkage
CAUTION
Check to be sure all bystanders have cleared the area.
10. If adjustment is necessary, start engine and resume
fl
oat.
Lower the header onto the ground until
member (A) lifts away from the link (B) on both sides.
11. Turn off the engine and remove the key.
Figure 4.187: Lift Linkage
214053
196
Revision A
Содержание M1240
