215634
101
Revision B
1034611
A
B
C
Figure 3.123: Left Engine-Forward Rear Light
6.
Mount light support (A) to stud (B) on the rear pivot
support with existing nut (C).
7.
Reinstall the anti-rotation bolt removed in Step
8.
Repeat Step
to Step
at the
opposite side.
1034603
A
A
A
B
A
Figure 3.124: Rear Light Bezel Assembly
9.
Using eight bolts and washers (A), attach rear light bezel (B)
to the light supports.
Installing rear light assembly
–
ballast required
1.
Refer to Table
to determine ballast to add to the windrower.
1022910
B
A
Figure 3.125: Bezel Assembly
2.
Separate light bezel assembly (A) by removing six hex
screws (B).