215620
102
Revision A
$
Figure 4.16: Gearbox Lubricant Filler
5.
If lubricant is needed, then remove breather cap (A) and
add lubricant until it runs out of the level check port.
NOTE:
Refer to
6.1 Lubricants, Fluids, and System Capacities, page
for information on the type and quantity of gearbox
lubricant needed.
$
Figure 4.17: Gearbox Lubricant Check Plug
6.
Replace oil level check plug (A) and the breather cap and
tighten both.
4.1.8
Checking Engine Gearbox Lubricant Level and Adding Lubricant
–
M1240
Ensure that the lubricant level is correct to maximize the service life of the gearbox components.
$
%
Figure 4.18: Gearbox Lubricant Dipstick
1.
Remove dipstick (A) and check the lubricant level.
