147867
12
Revision J
1020096
Figure 3.12: HPT Display
–
Home Page
13. If the ignition was recently on, wait 2
–
3 minutes for CAN
traffic to die down. When the system is ready, the home
page will appear on the HPT display.
NOTE:
For more information about how to navigate through the
HPT display, refer to the windrower operator
’
s manual.
1020095
A
Figure 3.13: USB Port on Console
14. Insert USB drive into USB port (A) at rear of console next to
ignition switch. After a few seconds, the HPT display will
update to show the software selection page.