![background image](http://html.mh-extra.com/html/macdon/d50/d50_operators-manual_685672250.webp)
169441
238
Revision D
4.11
Transport System (Optional)
The header can be equipped with a set of transport wheels so that the header can be towed by a windrower, combine, or
tractor. This option is available for use with 9.1, 10.7, and 12.2 m (30, 35, and 40 ft.) headers.
Refer to
5.3.2 Stabilizer / Slow Speed Transport Wheels, page 250
for more information.
4.11.1
Checking Wheel Bolt Torque
The transport wheel bolt torque should be checked after one operating hour following the installation of the wheels, and
every 100 operating hours thereafter.
1001277
2
3
4
5
6
1
Figure 4.238: Bolt Tightening Sequence
1.
Torque wheel bolts to 110
–
120 Nm (80
–
90 lbf·ft) using the
sequence shown at right.
IMPORTANT:
Whenever a wheel is removed and reinstalled, check the
wheel bolt torque after one hour of operation and every
100 hours thereafter.
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......