Form 169007
Revision D
Model D50 and D60 Harvest Header for Self-Propelled Windrowers
Pre-Delivery Checklist - N.A.
Perform these checks prior to delivery to your Customer.
Adjustments are normally not required as the
machine is factory assembled and adjusted.
If adjustments are required, refer to the appropriate page number
in this manual. The completed checklist should be retained either by the Operator or the Dealer.
CAUTION: Carefully follow the instructions given. Be alert for safety related messages which
bring your attention to hazards and unsafe practices.
Header Serial Number: ________________________
ITEM PAGE
Check for shipping damage or missing parts. Be sure all shipping dunnage is removed.
---
Check for loose hardware. Tighten to required torque.
6
Check tire pressure (Transport/Stabilizer Option).
35
Check wheel bolt torque (Transport/Stabilizer Option).
35
Check wobble box breather position.
35
Check wobble box lube level.
35
Check sickle drive belt(s) tension.
36
Check reel centered between header endsheets.
37
Grease all bearings and U-joints.
42 - 44
Check draper tension.
38
Check draper seal.
41
Check reel tine to cutterbar clearance.
40
Check fitment of endshields.
30
Check that skid shoes are evenly adjusted at a setting appropriate for first crop.
39
Check that header is level.
39
RUN-UP PROCEDURE.
46
Check hydraulic hose and wiring harness routing for clearance when raising or lowering
header and reel.
---
Check lights are functional.
33
Check
knife
speed.
46
POST RUN-UP CHECK. STOP ENGINE.
47
Check belt drives for heated bearings.
36 - 37
Check knife sections for discoloration caused by misalignment of components.
47
Check for hydraulic leaks.
---
Check manual storage case contains manuals.
45
Date Checked: _________________________
Checked by: __________________________________