Storing the Tow-Bar
1. Place the inner end of the outer half of the tow-bar into
the cradle (A) on the left side of the header backtube.
2. Secure clevis/pintle end of the tow-bar in support (B) on
the endsheet using hitch pin (C). Secure with lynch pin.
3. Install the rubber strap (D) on the cradle (A).
Figure 3.58: Tow-Bar Storage – Left Side
4. Place the inner end of the outer half of the tow-bar into
the cradle (A) on the right side of the header backtube.
5. Secure the tube end of the tow-bar in support (B) on
the endsheet using hitch pin (C). Secure with hairpin.
6. Install the rubber strap (D) on the cradle (A).
Figure 3.59: Tow-Bar Storage – Right Side
214044
77
Revision A