4. Lift end of reel endshield (A) off endshield (E) and
rotate down.
5. Remove bolt (B), steel tine (C), and bushing (D). Retain
hardware.
6. Remove the reel endshield (E).
Figure 5.205: Reel Endshields
7. Install new reel endshield (A) onto reel.
8. Reattach bushing (B) and steel tine (C) using retained
hardware (D).
Figure 5.206: Reel Endshields
9. Reinstall bolts (A).
10. Tighten all hardware.
Figure 5.207: Reel Endshields
Replacing Reel Endshield Supports
DANGER
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator’s seat for any reason.
214044
196
Revision A