215184
372
Revision A
Adjusting Auto Reel Speed
–
CLAAS 500 Series
The preset reel speed can be set when the automatic header functions are activated.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the combine
operator
’
s manual for updates.
1003752
Figure 9.148: CLAAS Combine Display
1.
Use the
<
or
>
key to select REEL WINDOW. Window E15
will display the current advance or retard speed of the reel
in relation to the ground speed.
1003749
A
B
C
Figure 9.149: CLAAS Combine Controls
2.
Press OK key (C) to open the REEL SPEED window.
3.
Use
–
key (A) or
+
key (B) to set the reel speed in relation to
the current ground speed. Window E15 will display the
selected reel speed.
1003753
A
Figure 9.150: CLAAS Combine Rotary Switch
4.
Manually adjust the reel speed by rotating the rotary switch
to reel position (A), and then use the
–
or
+
key to set the
reel speed.