UNLOADING AND ASSEMBLY
Form # 169078
Model Year - 2009
24
STEP 16. LUBRICATE THE
HEADER
a. Wipe grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
b. Inject grease through fitting with grease gun until
grease overflows fitting, except where noted.
c. Leave excess grease on fitting to keep out dirt.
d. Replace any loose or broken fittings
immediately.
e. If fitting will not take grease, remove and clean
thoroughly. Also clean lubricant passageway.
Replace fitting if necessary.
f. Refer to the illustrations on following pages for
lubrication points.
A30-S
AUGER SHAFT BEARING (1 PLC)
REEL SHAFT BEARING (1 PLC)
A30-S HEADER RH SIDE
High Temp. Extreme Pressure
(EP2) Performance With 1%
Max Molybdenum Disulphide
(NLGI Grade 2).Lithium Base
Содержание A30-S
Страница 2: ...Form 169078 Model Year 2009 MACDON A30 S SELF PROPELLED AUGER HEADER...
Страница 42: ...NOTES Form 169078 Model Year 2009...
Страница 43: ...NOTES Form 169078 Model Year 2009...
Страница 45: ......