![background image](http://html2.mh-extra.com/html/macdon/a30-s/a30-s_operators-manual_3209183181.webp)
SECTION 7 MAINTENANCE AND SERVICING
Form 169000 / 169040
179
Revision D
7.18.2 Pull-Type Mower Conditioner
7.18.2.1 Break-In Inspection: Pull-Type
HOURS ITEM
CHECK REFERENCE
1
Wheel Bolts
Torque
120 ft·lbf (160 N·m) Section 7.14.1
Steering Cylinder Clevis and
Stroke Control
52 ft·lbf (72 N·m)
5, 25, 50
Auger Drive Belt
Tension
Sections 7.11.3 and 7.11.4
Reel Drive Belt
Section 7.9.2
Sickle Drive Belt
Sections 7.8.9 and 7.8.10
5
Hardware Torque Section
7.3.1
10
Auger Drive Chain
Tension/
Lubricate
Sections 7.11.1 and 7.11.2
Reel Drive Chain
Section 7.9.1
Wobble Box Mounting Bolts
Torque
200 ft·lbf (270 N·m) Section 7.8.13
7.18.2.2 Interval Maintenance: Pull-Type
INTERVAL SERVICE
FIRST USE
Refer To Section 7.18.2.1 Break-In Inspection: Pull-Type
100 HOURS OR
ANNUALLY *
1. Check Conditioner Drive Gearbox Lubricant
Level.
2. Check Wobble Box Lubricant Level.
3. Check Wobble Box Mounting Bolt Torques.
4. Check Wheel Bolt Torques.
5. Grease Wheel Hub Bearings.
6. Change Hydraulic Oil Filter (First 100
Hours Only; Every 250 Hours Thereafter).
END OF SEASON
Refer To Section 6.19 STORAGE.
10 HOURS OR
DAILY
1. Check Hydraulic Oil Level.
2. Check Hydraulic Hoses And Lines For Leaks.
3. Oil Sickle (Except In Sandy Conditions).
4. Check Sickle Sections, Guards, and Hold
Downs.
5. Oil Reel Drive Chain.
6. Oil Auger Drive Chain.
7. Check Tire Pressure.
8. Check Wobble Box Bolt Torque (First 10
Hours Only; Every 100 Hours Thereafter).
25 HOURS
1. Grease Sickle Head.
50 HOURS
1. Grease APT Pivot.
2. Grease Reel Shaft Bearings.
3. Grease Auger and Jack-Shaft Bearings.
4. Grease Conditioner Drivelines.
5. Grease Conditioner Shaft Bearings.
6. Grease Roll Pivots Bearing.
7. Grease Frame-To-Header Pivots.
8. Grease Lower Float Link Bushings.
9. Grease Gauge Roller Bearings.
10. Change Wobble Box Lubricant. (First 50
Hours Only; Every 1000 Hours Thereafter).
11. Change Conditioner Drive Gearbox
Lubricant (First 50 Hours Only; Every 1000
Hours Thereafter).
250 HOURS
Change Hydraulic Oil Filter.
500 HOURS OR
3 YEARS
Change Hydraulic Oil.
1000 HOURS OR
3 YEARS
1. Change Wobble Box Lubricant.
2. Change Conditioner Drive Gearbox
Lubricant.
* IT IS RECOMMENDED THAT ANNUAL MAINTENANCE BE DONE PRIOR TO START OF OPERATING SEASON.