![background image](http://html.mh-extra.com/html/macdon/a30-d/a30-d_assembly-instructions-manual_685647017.webp)
UNLOADING AND ASSEMBLY
Form 169078
Revision C
17
STEP 12. INSTALL FORMING
SHIELD
a. Remove the header from the windrower (if
attached) for ease of installation of the forming
shield.
NOTE
Do not install the two triangular shaped
plates.
b. Install bolt (A) with spacer (B), and nut on each
leg in the upper hole. Hardware is supplied with
forming shield kit.
c. Remove the two clevis pins (C) from “forward
end” of forming shield.
d. Position forming shield under the windrower
frame.
e. Locate forming shield onto bolts (A) in
windrower legs, and secure with clevis pins (C)
and lynch pin.
f. Lift the aft end of the forming shield, and attach
straps (D) to pins (E) on windrower frame.
Install washer and hairpin to secure strap. Use
the middle hole, and adjust height to suit the
crop.
(continued next page)
A
B
C
C
A
D
E
Содержание A30-D
Страница 53: ...NOTES Form 169078 Revision C 53 ...
Страница 55: ......