MACDEV PRIME, Руководство пользователя

Страница: 12 / 12

ITEM NO.
PartNo
DESCRIPTION QTY.
1 X6BODY Body 1
2 VXDETENT Detent 2
3 X6FRAME Frame 1
4 X6WRAP Wrap around Grip 1
5 C6MPAD Membrane pad 1
6 9VBAT 9V battery 1
7 X5SHPRA Regulator assembly 1
7.1 X5SHPRP Inline regulator piston 1
7.2 X5HPRAB Regulator adjuster body 1
7.3 C6REGFC Regulator cap 1
7.4 C6REGR Regulator retainer 1
7.5 X5SSEAT Seat 1
7.6 C6LPRS Regulator spring 1
7.7 OR8 Number 8 o-ring 2
7.8 OR11 Number 11 o-ring 2
7.9 OR12 Number 12 o-ring 1
7.10 C6FIL Filter 1
7.11 X5SHPRAR Adjuster retainer 1
7.12 X5SHPRAC Adjuster cap 1
7.13 X5SHPRAV Adjuster valve 1
7.14 X5SHPRAS Adjuster spring 1
7.15 ORM3 M3 o-ring 1
8 X6TRIGA Trigger Assembly 1
8.1 X6TRIG Trigger 1
8.2 X6TRIGG Trigger guide 1
8.3 S6-3-16 Trigger short screw 3
8.4 VXTBEAR Trigger bearing 2
8.5 S6-3-16-C S6-1-4 screw 1
8.6 C6TSPRING Trigger spring 1
8.7 S6-1-2 Trigger long screw 1
8.8 X6TRIGP Trigger pin 1
8.9 C3-1-2 Trigger assembly mount screw 2
9 B5-3-16 B5-3-16 screw 5
10 C6MPADS Membrane pad screw 1
11 C4-1-8 Eye cover screw 2
12 B7-1-4 Frame mount screw 3
13 C8-5-16 Front grip core screw 1
14 C7-5-16 C7-5-16 screw 2
15 X6ASA ASA assembly 1
15.1 X6ASAB ASA body 1
15.2 C3-3-4 ASA lever screw 1
15.3 X6ASAL ASA Lever 1
15.4 X6ASAP ASA Pin 1
15.5 X6ASAR ASA Retainer 1
15.6 X6ASAS ASA Spring 1
15.7 OR7 Number 7 o-ring 2
15.8 OR8 Number 8 o-ring 1
15.9 OR5 Number 5 o-ring 1
16 DXSOL Solenoid 1
16.1 D2SOLG Solenoid gasket 1
17 X6FTA Feed tube assembly 1
17.1 VXFTBODY Feed tube body 1
17.2 VXFTLEV Feed tube lever 1
17.3 X6FTAS Feed lever adjuster screw 1
17.4 VXFTM Feed tube mount screw 1
17.5 C3-1-4 C3-1-4 screw 1
18 X6EC-LHS Eye cover left hand side 1
19 X6EC-RHS Eye cover right hand side 1
20 S2BAC Shift 2 barrel assembly 1
20.1 S2IXXX Shift 2 insert 1
20.2 S2BAC Shift 2 back 1
20.3 S2T14 Shift 2 tip 1
20.4 S2G Shift 2 grip 1
20.5 OR17 Number 17 o-ring 1
20.6 OR16 Number 16 o-ring 1
20.7 ORM18 M18 o-ring 1
21 Board assembly 1
21.1 X6MBOARD Main board 1
21.2 C6DBOARD Display board 1
22 B5-7-8 Front grip cap screw 1
23 X6BB Body board 1
23.1 X6BB Body board 1
23.2 4
23.3 2
23.4 1
23.5 1
24 C3-1-4 C3-1-4 Screw 5
25 X6FGCAP Front grip cap 1
26 X6FGCORE Front grip core 1
27 X6FG Front grip rubber 1
28 X6SP Subplate 1
29 Drivetrain assembly 1
29.1 X6BOLT Bolt 1
29.2 x6BTIP Bolt tip 1
29.3 X6VAL Valve 1
29.4 X6VNN Valve nose nut 1
29.5 X6VNC Nose cone 1
29.6 X6KEG Keg 1
29.7 X6VC Valve cap 1
29.8 X6DSC Detent spring carrier 1
29.9 CL5VALS Drive spring 1
29.10 X6DCAP Drive cap 1
29.11 CL5PPD Pullpin detent 1
29.12 CL5PP Pullpin 1
29.13 X6DC Drive cover 1
29.14 OR20 Number 20 o-ring 4
29.15 OR17 Number 17 o-ring 1
29.16 OR19 Number 19 o-ring 1
29.17 OR14 Number 14 o-ring 1
29.18 ORM16-2 M16-2 o-ring 1
29.19 X6BUMP Bump stop 1
29.20 OR14 Number 14 o-ring 1
29.21 OR110 Number 110 o-ring 1
29.22 OR16 Number 16 o-ring 1
29.23 OR11 Number 11 o-ring 1
30 C6TPLUG Subplate plug 1
31 X5EYE Eye set 1
32 ORM4 M4 o-ring 1
33 OR7 Number 7 o-ring 1
34 ORM2 M2 o-ring 1
35 1
36 2
37 1
38 S2T14 Shift 2 tip 1
39 S2BAC Shift 2 back 1
40 S2IXXX Shift 2 insert 4
22
PRIME SPECIFICATIONS
(Specs are a guide only and may change without notice)
Physical
Length 225mm (538mm with barrel)
Width 34mm
Height 205mm
Weight 895g with barrel and battery
Barrel Threads Autococker
Performance
Operating pressure 100psi
Maximum Rate of Fire 30 BPS (only allowed with eyes on, and paint)
Electronics
Software Militiasoft V1.xx
Hardware PRIME V1.03 (Lead Free)
Display 65K colour OLED, low power usage 128x32px
Power 9V standard battery 6LR61
Fire modes Semi, NXL, PSP, Custom ramp, Full Auto
Connectivity Mini USB
Solenoid 5V 1W
MACDEV TECHNICAL
ASSISTANCE
If you require technical assistance,
please contact your local MacDev
service centre. You can also find
assistance on the MacDev support
website :
macdevpaintball.com/support
Symptom Possible Cause Solution
Your Prime fires high on
the first shot or
inconsistently.
Creeping regulator Clean and lubricate the reglulator, ensure that
the seat and piston are in good condition.
Your Prime fires low on
the first shot
Sticking drivetrain Clean and relubricate the drivetrain. If you
continue to have problems:
-increase the dwell by 1-2 ms.
-increase the ABS parameter on your board.