LB. 00151-00-GB
Pag. 14
02/08/06
SYSTEM CLOCK PROGRAMMING
N:B: The System Clock parameters are available only with the system clock enable.
To enter in System clock programming, proceed as follows.
WITH SMART-CARD:
Insert the Owner or Waiter smart card into the proper slit
and keep pressed the
key N°17
(Enter) .
WITH PASSWORD :
Digit the Owner or Waiter password .
The display shows :
Press the key N° 14 ( - ), the display show:
Press the keys N°17 (Clean/Enter), the display shows:
Press the key N° 13 ( + ), the display show:
Press the keys N°17 (Clean/Enter), the display shows:
Press the keys N° 13(-) and N° 14 (+) to change the time (HH : MM).
Press the key N°17 (Clean/Enter) to confirm the modification carried out.
CLOCK DISPLAY
Press the keys N° 14 (-) and N° 13 (+) to display the clock ( ENABLE ) or to do not display it (DISABLE)
Press the key N°17 (Clean/Enter) to confirm the modification carried out.
AUTO START-UP
Auto Start-up
Disable
Enable
+ / -
Auto Start-up
ON OFF
XX:XX XX:XX
Enter
Auto Start-up
Day Off
XXXX
Enter
Press the keys + / - to program the
machine day off
(Sunday - Monday etc.)
+ / -
Press the keys + / - to program the
automatic switch ON and OFF
+ / -
Select
Info reset
Select
System Manager
System Manager
Machine Parameter
System Manager
System Clock programming
System Clock programming
HH:MM
- - / - -
System Clock programming
Clock Display
Disable
