USER GUIDE
About this guide
Before you start using the Macally BTVVMOUSEBAT,
be sure to read this guide in its entirety.
Safety intructions
Package contents
• BTVVMOUSEBAT
• Charging cable
• User guide
Hardware basics
Installation instructions
Thank you for purchasing the Macally
BTVVMOUSEBAT. The Macally BTVVMOUSEBAT is
a rechargeable Bluetooth wireless optical mouse
with a 800/1200/1600 DPI switch button, two
soft-click buttons and scroll wheel/button for a
precise and smooth control. The ergonomic and
ambidextrous design offers maximum comfort to
both left-handed and right-handed users and helps
to increase productivity. The 300mAh built-in
rechargeable battery will power the
BTVVMOUSEBAT for up to 2-3 months before next
charging is required.* No need to buy and replace
batteries anymore! The BTVVMOUSEBAT works
both with Mac, PC, iOS/iPadOS and Android, and
doesn’t require any driver.
Please read the following carefully before using this
Macally product. Incorrect use of this product may
result in reduced performance, permanent
damage and void warranty:
1. Do not place this product near a heat source.
2. Operating temperature of 0°C to 40°C. Storage
temperature of -20°C to 65°C.
3. Do not place this product near moisture nor
liquids.
4. Operate and store at humidity of 20% to 80%
(non-condensing)
5. Do not place heavy objects on this product.
6. Do not drop this product.
7. Do not dispose this product in the garbage. Take
it to your local recycling centre.
The Macally BTVVMOUSEBAT does not require a
driver, only a Bluetooth enabled computer or a
mobile device. Simply follow the steps below and
you are ready to go!
Pairing the mouse with a Mac
1. To connect the Bluetooth mouse to your
computer, bring it within 1 ft /25 cm range from
your computer.
2. In your Mac, open ‘Bluetooth’ in ‘System
preferences’. Make sure Bluetooth is On.
3. Then, turn on the mouse, press and hold down
both left and right buttons for 5 seconds, pairing
light flashes under the scroll wheel.
4. 'Bluetooth Mouse’ will appear in the list of
Bluetooth Devices. Please click on ‘Connect’.
5. When 'Bluetooth Mouse’ shows connected, you
are ready to use the BTVVMOUSEBAT.
Pairing the mouse with Windows PC
1. To connect the Bluetooth mouse to your
computer, bring it within 1 ft/25 cm range from your
computer.
Left and right Buttons
Pairing: press and hold down both left and right buttons
for 5 seconds, pairing light flashes under the scroll wheel.
Scroll wheel
/Button
Charging
cable
Charging port
800/1200/1600
dpi optical
sensor
DPI switch
(800 / 1200
/ 1600)
ON
ON/OFF
switch
OFF
