MTC650
by
MacAllister
Getting
started...
05
Technical specifications
General
>
Input Voltage
>
Power Input
>
No Load Speed
>
Insulation Class
>
Diamond Disc Size
>
Table Size
>
Table Size (with Extension Table)
>
Extension Table Width
>
Maximum Extension Range
>
Table Tilt Range
>
Maximum Cutting Depth
>
Net Weight
:
:
:
:
:
:
:
:
:
:
:
:
220-240V~50Hz
650W
5500min
-1
Class I
ø180mmx2.4mmxø22.2mm
345x345mm
400x640mm
120mm
150mm
0°/15°/30°/45°
30mm (90°) / 23mm (15°)
17mm (30°) /10mm (45°)
7.6kg
NOISE
A weighted sound pressure L
pA
.............................................................96.9dB(A)
A weighted sound pressure L
WA
.............................................................107dB(A)
Uncertainty................................................................................................3dB(A)
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
Important note
Remove the mains plug from socket before carrying out any adjustment or
servicing.
Ensure your mains supply voltage is the same as your tool rating plate voltage.
The following information applies to professional users only but is
good practice for all users:
ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST
The updated Control of Substances Hazardous to Health Regulations 1st October
2012 now also targets to reduce the risks associated with silica, wood and gypsum
dusts.
Construction workers are one of the at-risk groups within this because of the dust
that they breathe: silica dust is not just a nuisance; it is a real risk to your lungs!
Silica is a natural mineral present in large amounts in things like sand, sandstone
and granite. It is also commonly found in many construction materials such as
concrete and mortar. The silica is broken into very fine dust (also known
Technical and legal
information
EN
