MacAllister MHT55050, Руководство пользователя

Страница: 15 / 32

EN
15
MHT55050 by MacAllister
Getting
started...
Before you start
Connection to power supply
1. Double the power cord (10) back, about 60 cm from the power guard and lead
the loop through the hole of the rear safeguard (8) (Fig. 2).
2. Pull it over the cord retainer (9) and gently tug on the power cord (10) to
ensure that it is firmly secured (Fig. 3).
3. Connect the plug of power cord (10) with a suitable socket.
4. Your product is now ready to be used.
WARNING! The product is equipped with a power cord with the
length of 10 m. If a proper extension cord is required for operation.
The extension cord must be suitable for outdoor use with sockets
protected against water splashing! Ensure the extension cord is of the
proper size and type for your product (≥ 1.0 mm²)!
Always use a residual current supply (RCD) protected supply.
WARNING! Check the voltage! The voltage must comply with the
information on the rating label!
If using an extension cord it must be suitable for outdoor use with
sockets protected against water splashing.
Ensure the extension cord is of the proper size and type for your
product:
· 1.5 mm 2 for up to 60 m
· 2.5 mm 2 for up to 100 m
9
8
10
Fig. 2
9
8
10
Fig. 3