MacAllister 5052931013890 Скачать руководство пользователя

Страница: 36 / 46

MCS2400

by MacAllister

detail...

Guaranteed sound power level value in 105 dB

This product is of protection class II. That means it is

equipped with enhanced or double insulation.

The product complies with the applicable European

directives and an evaluation method of conformity for

these directives was done.

WEEE symbol. Waste electrical products should not

be disposed of with household waste. Please recycle

where facilities exist. Check with your Local Authority

or local store for recycling advice.

Technical and legal information

Safety warnings

This product is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the product

by a person responsible for their safety.

Children should be supervised to ensure that they do not play

with the product.

General power tool safety warnings

WARNING!

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in

electric shock, fire and/or serious injury. Save all warnings

and instructions for future reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Symbols

MNL_MCS2400_DFT_GB_V05_111108.indd 36

11/8/11 5:17:41 PM

Содержание 5052931013890















































Результаты поиска

Содержание 5052931013890

Отзывы:

Похожие инструкции для 5052931013890

Бренды по названию

Популярные бренды

MacAllister 5052931013890, Руководство пользователя

Результаты поиска

Содержание 5052931013890

Отзывы:

Похожие инструкции для 5052931013890

Бренды по названию

Популярные бренды