MANUAL
DT-1700
12
MAIN MENU
START TRANS
SCAN
YES
SCANNING....
PLEASE WAIT
MAIN MENU
CHOOSE CHAN.
TV3 Sverige
NAME TV3
Sverige
CHANNEL SEARCHING
After adjusting the settings for the desired transponder, a channel search
can be carried out. The QPSK lock (yellow LED) will shine with a constant
light if the receiver locates channels. If the alarm (red LED) lights up, the
installation and settings must be checked.
ENTER
Select YES and press the Enter button to start the channel search.
The display indicates that the search is in progress. After
completion a menu will appear showing all the channels found on
the transponder. Select NO to set the PID, see page 18.
Use the Up/Down buttons to select a desired channel.
ENTER
Press the Enter button and the desired channel will be saved. If
an updated programme card*, see page 5, has been inserted,
the channel will be displayed on the TV screen.
IMPORTANT
: PIDs are only to be used if problems are
encountered when trying to find a desired channel and no
information is available for picture, sound and text.
CHANGING CHANNEL
Changing to another channel within the transponder can easily be done
using the buttons on the front of the DT-1700. De-activate by pressing the
MENU and ENTER buttons at the same time for approximately 2 seconds
Press the Left button.
Use the Up/Down buttons to select the desired channel.
ENTER
Press the Enter button and after a few seconds the
channel will be displayed on the TV screen.
* THE NDS SYSTEM – VIDEOGUARD
The programme card must be paired to the receiver before the card can
be updated and a picture seen. Contact the programme supplier for
pairing the card and receiver. The receiver’s unique ID number (STB ID)
can be found in the Information menu, see page 15.
50009-2 Bruksanvisning DT-1700 ENG-1.pmd
2005-02-24, 11:02
12
