MAC BRAIN1, Руководство пользователя

Страница: 7 / 16

info@mac-srl.it
7
Brain_1_08 190722
GBR
3.0 PROGRAMMING - FUNCTIONING
3.a) RESET OF THE CONTROL BOARD
This function allows to go back to the basic programming;
Working time 8 seconds;
Traffic lights waiting time 10 seconds;
Limit switch delayed of 200 ms;
Automatic reclosing excluded;
Basic radio code: button 1 of a tX type 53200 with DIP 1,3,5,7,9 on and DIP 2,4,6,8,10 off
RESET PROCEDURE :
1) Push 1 time the PROG button (the OK and EXT LEDs are fixed on)
2) Push and keep pushing simultaneously the aP (6) and CH (7) buttons
3) After about 3 seconds the LED OK starts to flash quickly
4) Release the aP(6) and CH(7) buttons
5) When the OK LED ends to flash and turns itself off, the reset is finished..
3.b) RADIO CODES PROGRAMMING:
PROCEDURE :
1) Push 1 time the PROG button (the OK and EXT LEDs are fixed on).
2) Send the radio code to be memorized by keeping a distance of at least 50 cm from the control board.
3) If the code has been memorized, the LED OK flashes.
4) If there are other codes to be memorized, repeat from point 3
5) Push 2 times the PROG button (the OK led turns itself off) to exit from the radio codes programming.
3.c) COMBINATION RADIO FUNCTION
If no input is active during the sending of the code to be memorized (point 3b), the command is matched with the
“Start-Stop” function (SteP BY SteP).
to match the radio command with the oPen function, activate the input aP (6) while sending the code.
to match the radio command with the CLoSe function, activate the input CH (7) while sending the code.
to match the radio command with StoP function, activate the input StoP (3) (open the contact) while sending
the code.
3.d) CANCELLATION SINGLE RADIO CODE:
PROCEDURE :
1) Push twice the PROG button (The LED OK is fixed ON while the LEDs EXT flash).
2) Send the radio code to be cancelled.
3) If the led OK flashes 3 times, the code has been cancelled. Instead, if it flashes 1 time slowly, it means that
the radio code isn’t present in memory.
4) If there are other codes to be cancelled, repeat from point 3
5) Push 2 times the PRoG button to exit from the radio codes cancellation (the oK led and the external leds
turn their selves off)
3.e) CANCELLATION OF A GROUP OF CODES:
It allows to delete all the same type codes with a single operation.
PROCEDURE :
1) Push 2 times the PROG button (the led OK is on, whereas the leds EXT flash)
2) Select the group to be cancelled:
- button aP(6) >> canc. all the codes oPen
- button CH (7) >> canc. all the codes CLoSe
- button StoP(3) >> canc. all the codes StoP
- opening f2(4) >> canc. all the codes (SteP BY SteP)
3) The OK led quickly flashes during the cancellation
4) When the led OK turns off, the procedure is finished
3.f) PROGRAMMATION TIME OF AUTOMATIC RECLOSING:
PROCEDURE :
1) Push and keep pushed the PROG button (the led OK and the leds EXT are on, fixed)
2) After about 3 seconds, the led OK starts to flash
3) Release the PROG button, the led OK keeps flashing
4) Push and keep pushed the CH(7) button for the time you wish to memorize
5) When the CH(7) button is released, the led OK turns off and the procedure is finished
During the normal functioning the automatic reclosing can be excluded by sending the Start/Stop command
during the pause or by activating the emergency stop.