JSA350LR
6
Rev. 04/28/20
#3
#1
IMPORTANT:
Service jacks are designed for lifting purposes only; always support raised load with jack stands.
MONTHLY or as necessary (depending on usage)
#1 Using a grease gun, add grease to grease fitting in the lift arm pivot shaft.
(Use a multi-purpose NLGI type grease only.)
#2 Lubricate all linkages and pivot points.
(Use white lithium spray grease only.)
#3 Remove handle; lubricate handle receptacle and handle end.
(Use white lithium spray grease only.)
#4 Lubricate both rear casters bearings and both front wheels.
(Use white lithium spray grease only.)
Tighten all accessible hardware.
REGULAR MAINTENANCE
JSA350LR
3.5 TON
CAPACITY
FLOOR JACK
HYDRAULIC MAINTENANCE GUIDE
#2
#4
#3
#4
#2
