MAC Rail MAC-859 Скачать руководство пользователя страница 5

Страница: 5 / 8

Page

–

MAC Rail LLC. Fort Worth, Texas 76244 wwww.macrailproducts.com

STEP 4

–

PREPARE RCL ANTENNA BOX

While the glue is drying on your RCL stand, turn your attention to the antenna box.

Using your sanding stick, ensure the 3 small nubs on the bottom of the antenna box are
sanding smooth.

It is easier to install the 0.015 wire conduit to the antenna box on the workbench vs
trying to install it while on locomotive.

One end of the antenna box has a hole for this wire, it is not very deep but just enough
to glue and let it set until dry

…

Содержание MAC-859

Страница 2: ...4 RCL Stands Large 5 RCL antenna boxes 4 Pieces of 015 wire for conduit 1 Custom decal set 1 Bag of horse hair bristles for fine scale antenna 3 Conduit boxes If you are missing anything please send an email to macrailllc gmail com TOOLS FOR INSTALL Safety glasses Glue CA Gel Type Canopy glue Hobby Knife Tweezers Flush cutter Decal Setting Solution Sanding stick Ruler ...

Страница 3: ...First task to complete is sanding the tops of your RCL stands smooth These are very delicate parts with very thin legs To make this easier the foam sheet the legs sit in also is handy to help holding the part while sanding Using a sanding stick work across the surface of the stand until you have smoothness desired ...

Страница 5: ...tention to the antenna box Using your sanding stick ensure the 3 small nubs on the bottom of the antenna box are sanding smooth It is easier to install the 0 015 wire conduit to the antenna box on the workbench vs trying to install it while on locomotive One end of the antenna box has a hole for this wire it is not very deep but just enough to glue and let it set until dry ...

Страница 6: ...Using canopy glue apply with a toothpick to bottom of antenna box Then place box onto RCL stand Conduit for both boxes will be facing toward front of locomotive Let glue dry While the antenna box dries go ahead and install the conduit box behind the headlight A light sanding on the bottom will be required before install ...