MAC PARA Yukon, Руководство пользователя

Страница: 22 / 28

22
(&(
Repairs and checks:
•
Tears in the canopy must be professionally sewn. Adhesive patches are only
adequate for very minor damage.
•
Repairs should only be carried out by the manufacturer, distributor or authorized
workshops. Only original spare parts may be used!
•
The lines must be checked after every 50 hours flying time and whenever the flight
behaviour changes
•
Any changes to the canopy lines or risers, except those approved by the
manufacturer, will void the certificate of airworthiness.
•
The Yukon must be checked as a minimum, after two years or after 100 flying
hours by the manufacturer or authorized workshops.
Disposal:
•
The synthetic materials used in a paraglider need professional disposal. Please
send disused canopies back to us: we will dismantle and dispose of it.
In Conclusion:
The Yukon is a modern paraglider. You will enjoy many safe years of flying with your
Yukon if you look after it correctly and adopt a mature and responsible approach to the
demands and dangers flying can pose.
It must be clearly understood that all air sports are potentially dangerous and that your
safety is ultimately dependent upon you. We strongly urge you to fly safely. This
includes your choice of flying conditions as well as safety margins during flying
manoeuvres. We recommend once more that you only fly with a certified harness,
reserve parachute, and helmet. Also the certification placard must be present on the
glider. Every pilot should be suitably qualified, have a valid license and 3rd party
insurance.
The Yukon is delivered with a stuff-sack, Velcro compression strap, MAC PARA
backpack, repair kit and user manual.
TREATING NATURE WITH RESPECT
Finally the call to practise our sport with respect for nature and wildlife! Don't walk
outside marked routes, don't leave any waste, don't make needless noise and respect
the sensitive biological balance in the mountain eco system: especially in the takeoff
area!
LINE PLANS
Line descriptions:
The following printed line plans show the line configurations.