9
3. Correct assembly must be checked by a test release of the rescue system. If the
system is working then reassemble in the same way as described.
Attention!
Before each take-off check the locking pins securing the outer container.
Attention!
If you are unsure of the correct assembly of your rescue system ask your
dealer, or contact the MAC PARA importer in your country direct.
10
Speed system
Towing
Tandem flying
Harness check before take off
Maintenance and repairs
The XCL harness is equipped with a speed system and includes Brummel hooks as
supplied on MAC paragliders. The speed bar lines feature rubber lines preventing free
movement of the speed bar unless required. The speed bar maintains its position while
standing in spreader bar and can be operated by foot without hand help.
The XCL harness is excellent for towing. The release system must be connected to the
same carabineers attaching the paraglider risers. To attach the release system properly,
insert the release bridle in such a way that the release itself is in front of the risers, in the
direction of flight.
The XCL harness is not suitable for tandem flying as passenger harness.
Checking the XCL harness before take-off is crucial. Always check the following points:
- Is the rescue system handle attached properly?
- Are rescue system securing pins inserted correctly?
- Are all pockets closed properly?
- Make sure that each buckle is fastened properly. Check for correct fastening by pulling
on both straps leading to the buckle.
- Make sure that the main carabineers are fastened properly
We suggest you have your harness checked by an authorised person once every two
years. If you have your reserve repacked, ask for a harness check. The main aluminium
carabineers must be replaced after 500 hours of use. Impacts may create undetectable
cracks that, because of continual cyclic loads, could result in structural damage. Avoid
dragging your harness on the ground and rocks etc. Protect from unnecessary
exposure to UV rays, avoid storing when damp and avoid exposure to extreme
temperatures.
Clean the harness only with lukewarm water with a light soapy solution. Use of chemical
cleaners or thinners is expressly prohibited. Keep automatic buckles clean. They may
be lubricated once in a year with a silicon spray.
The customer may not do any harness repairs or replacements of spare parts
him/herself. This can lead to limitation of functionality, or can even endanger your life.
For this reason any repair or corrections must be made directly by the manufacturer.
.
Attention!
Pay special attention during winter in ice or snow. Always clear any ice or
snow before fastening the buckles.