MAC PARA T-Ride Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 32

MAC PARA T-Ride Скачать руководство пользователя страница 3

3

GENERAL

Dear MAC PARA pilot

We congratulate you and appreciate your purchase of the MAC PARA T-RIDE
paramotoring glider. Extensive research and development makes the T-Ride a state-of-
the-art paramotoring glider. Numerous safety tests have been made to allow you to
safely enjoy the performance of this glider. The entire Mac Para team welcomes you
and we wish you many pleasant flights. To stay safe you

MUST

read this manual

carefully before flying.

T-Ride Highlights

The T-Ride is a semi reflex paramotoring glider for two-seat trikes. It was designed for
skilled advanced trike or quad pilots looking for an easy to use glider with a wide speed
range and responsive handling. Other benefits are easy launch and landing speeds,
excellent stability and efficient fuel consumption when paramotoring.

Please note the following details before you fly:

Get Proper Training

The purpose of this manual is to offer you information about the unique design features
of the T-Ride for maximum enjoyment.

This Manual is in no way intended to be used

as a training manual.

Paragliding and paramotoring are sports which demand high

degrees of attentiveness, good judgement, and theoretical knowledge. Paramotoring
can be a dangerous sport which may lead to injury and death. Get proper instruction
before you attempt to fly with a qualified professional and accredited school.

Take Responsibility

The use of this paramotoring glider is solely at the owner’s risk! The manufacturer and
distributor do not accept any liability. You are responsible for your own safety and the
gliders airworthiness. Mac Para assumes no responsibility. Mac Para recommends the
pilot is in possession of a valid paramotoring licence for the glider's category, insurance,
and training etc. for the country in which the glider is flown.

Manufacture Quality Control Checks

Before delivery, as well as during production, each paramotoring glider goes through a
strict visual inspection. It should also be test-flown by your dealer. Stamps on the
placard with a completed test-flight certificate confirm this. It is your responsibility to
check that your new T-Ride paramotoring glider has been test-flown before your first
flight. If it has not, consult your dealer.

Minimize Your Risks

Any inadequate use or misuse of your T-Ride increases the risks considerably. Below is
a list of conditions that must be avoided.

«
1
2
3
4
5
...
»

Содержание T-Ride

































Отзывы:

Нет отзывов