manualshive.com logo in svg

MAC PARA Blaze, Руководство пользователя

Поделиться
Скачать
MAC PARA Blaze Скачать руководство пользователя страница 4

 

4

 

GENERAL 

DO NOT USE outside the manufacturers recommended weight range. 

DO NOT USE during rain or snow-fall.   

DO NOT USE in high or gusty wind conditions 

DO NOT USE in cloud and fog.  

DO NOT USE without sufficient knowledge or experience.  

DO NOT USE under the influence of drugs, alcohol or sickness. 

DO NOT USE for aerobatics or extreme manuvers. 

NOTE: Any changes or modifications made to this paramotoring glider invalidate the 
certificate of airworthiness. Please check the warranty conditions near the end of this 
manual. Registration of your MACPARA Blaze GT is required. 

MACPARA Wants to Help 

If you have read this manual and still have questions, suggestions or criticisms 
regarding the Blaze GT, please do not hesitate to contact your dealer or MACPARA 
directly. Our mission is to design quality performance gliders that allow you the freedom 
of flight while keeping you as safe as possible.  

 

PILOT LEVEL REQUIREMENTS 

The Blaze GT has been design for pilots that have been paramotoring for some time. It 
is not intended for beginners or for pilots that lack the necessary piloting skills to control 
its advanced performance features. We recommend you should have a minimum level 
of 50 flying hours in various conditions and have completed at least one full year flying 
paramotoring gliders with adjustable trimmers before flying the Blaze GT 

Various Conditions 

The Blaze GT can adapt to suit a full range of conditions and types of paramotoring. 
The exception is acrobatic flying.  In strong turbulence and gusting winds a partial or 
complete collapse of the canopy can result. Never fly in such conditions. 

Certification 

The Blaze GT is light sport aircraft with an empty weight of less than 120 kg in the 
category paraglider. Even though it is possible to use the Blaze GT for free flying, 
please note it is not EN certified. The Blaze GT is firmtested in according to DGAC ( 
French  airworthiness requirements) for powered flying. In according to its construction 
some manoeuvres could not be tested. It is asymetric and frontal collapses in the 
combination of accelerator and open trimmers. 

Содержание Blaze









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды