MAC Audio StarX 2.16, Руководство пользователя

Страница: 4 / 20

GB
4
GB
DEAR CUSTOMER,
We congratulate you on acquiring this MAC
AUDIO Car Stereo Product.
Please read these instructions carefully
so as to ensure optimum and
disturbance-free functioning of the
appliance. Technical modifications
reserved.
POSITIONING AND SECURING THE
SPEAKER SYSTEM (FIG. 1)
Use the mounting positions provided in your
vehicle. If the speakers do not fit, they can
be placed in the rear window shelf.
Fig. 1
(1) Depth
(2) Driver diameter
Fig. 1A
(1) Use mounting ring to mark position of
speaker opening and fastening holes
(2) Cut out opening and drill holes
Make sure that the subwoofer is secured
in such a way that it cannot slip or slide.
Use the screws provided for this
purpose. Damage resulting from sudden
changes in speed (e.g. hard braking) is
not covered under the terms of our
guarantee.
CONNECTINGTOTHERADIO/AMPLIFIER
(FIG. 2)
The speaker system should preferably be
connected to an external power amplifier.
This can provide the required electrical
power and create corresponding dynamic
reserves. The relevant instructions also
contain the customized connection diagram
for the operation of a speaker system.
Should you not have a power amplifier, the
speakers can also be connected directly to
the radio. The relevant operating
instructions also contain the connection
diagram for this situation.
Please note that only limited dynamic
reserves will be available in this case.
Excessively low outputs combined with
high distortions can destroy your
speakers.
TWEETER LEVEL SWITCH/FILTER
SWITCH (FIG 2)
1) In some cases - depending on the
installation and listening position - it is
acoustically advantageous to change
the tweeter's slope / filter from 12dB to
6dB per octave. More of the mid-range
is reproduced by the tweeter in the 6dB
position. Optimum acoustic
performance in your vehicle can be
determined through trial and error. In
any case the filter switches on the left
and right channel must be located in the
same position.
2) This switch allows the tweeter level to be
increased by 3dB/6dB. Again, the best
position can be determined here through
trial and error.
INSTALLING THE TWEETER (FIG. 3)
INSTALLING THE GRILLE (FIG. 4)