04
Safety devices
Blade guard [14]
Protects against accidental touching of the saw blade and flying chips. The blade
guard and blade guard apron must always be mounted during operation.
Riving knife [3]
Prevents a work piece from being caught by the ascending teeth and being flung
against the operator. The riving kinfe must be mounted during operation.
Push stick [26]
Serves as an extension of the operator’s hand and protects against accidental
touching of the saw blade. The push stick must always be used if the distance
between the rip fence and saw blade is less than 12 cm.
1. Dust extraction adapter
2. Right extension table
3. Riving knife
4. Rubber foot
5. Stand
6. Height adjusting handle
7. On/Off switch
8. Bevel adjusting handwheel
9. Overload reset switch
10. Bevel locking handle
11. Front rail
12. Mitre gauge
13. Left extension table
14. Blade guard
15. Dust extraction hose
16. Rear extension table
17. Table insert
18. Hose hold
19. Rip fence
20. Mitre gauge storage
21. Rip fence storage
22. Rip fence locking handle
23. Saw blade
24. Working table
25. Push stick
26. Blade wrench
27. Push stick storage
28. Blade wrench storage
Your product
MSTS1500-A
by
MacAllister
Getting
started...
EN
