Mac allister MLM1737, Оригинальное руководство пользователя

Страница: 27 / 40

EN
27
In
more
detail...
MLM1737 by MacAllister
After use
Operation
cut area will not be exposed to direct sunlight.
3. Set the cutting height to about one third of the grass blade length, ideally
no more than 35 mm at one time for best mulching performance. If the lawn
is overgrown, it may be necessary to increase the cutting height to reduce
the pushing effort and prevent the motor overloading. For extremely heavy
mulching, it is advisable to first cut at a high cutting height, and then again to
a lower cutting height. Otherwise, make narrower cuts and mow slowly.
4. Keep the housing free of built-up grass for best performance. From time
to time switch the product off and wait for the blade to come to a complete
stop. Then turn the product on its side. Using an object such as a wooden
stick, remove any accumulation of grass in the blade area. Be careful of
the sharp edges of the blade. Clean often after cutting new grass and after
every use.
5. Certain types of grass or grass conditions may require an area to be
mulched a second time to fully disperse the grass across the lawn. When
cutting a second time, it is advisable to cut perpendicular (across) the first
cutting pattern. Do not change the cutting pattern in any way that would
cause you to mow downhill.
6. Change your cutting pattern from week to week. This will help prevent
matting and graining of the lawn.
1. Switch the product off, disconnect the plug from the power supply and let it
cool down.
2. Check, clean and store the product as described below.
Mowing