EN
22
In
more
detail...
MHT60060
by MacAllister
Operation / Care and maintenance
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
3. Inspect the product before each use for worn and damaged parts. Do not
operate it if you find broken and worn parts.
1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for
areas that are hard to reach.
2. In particular clean the air vents (5) after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
4. Check for worn or damaged parts. Replace worn parts as necessary or
contact an authorised service centre for repair before using the product
again. Check for worn or damaged parts. Replace worn parts as necessary or
contact an authorised service centre for repair before using the product again.
The golden rules for care
General Cleaning
WARNING!
Only perform repairs and maintenance work according to
these instructions! All further works must
be performed by a qualified
specialist!
NOTE:
Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
1. Switch the product off, disconnect the product from the power supply and let
it cool down.
2. Attach the blade cover (14) if necessary.
3. Check, clean and store the product as described below.
After use
WARNING!
Always switch the product off, disconnect the plug from
the power supply. Let the product cool down before performing
inspection, maintenance and cleaning work!
