8
The nozzle and accessory become very hot during use. Let them cool down before attempting to
move or store the tool.
To reduce the cooling time, switch the tool on at the lowest air temperature setting and let it run
for a few minutes.
Switch the tool off and let it cool down for at least 30 minutes.
9
MAINTENANCE AND CLEANING
Attention! Before performing any work on the equipment, pull the power plug.
9.1
Maintenance
Your Power Tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
9.2
Lubrication
Your power tool requires no additional lubrication.
9.3
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft cloth.
9.4
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.
10 TECHNICAL DATA
Voltage
220-240 V ~ 50HZ
Power supply
2000 W
Air temperature / Flow
1 50
℃
；
500L/min
2
450
℃；
250L/min
3 600
℃；
500L/min
11 WARRANTY
This product is warranted in
accordance with the legal/country specific regulations, effective
from the date of purchase by the first user.
This warranty covers all material or production flaws. It does not include: defective parts subject
to normal wear & tear, such as bearings, brushes, cables, plugs or accessories such as drills,
drill bits, saw blades etc,; damage or defects resulting from abuse, accidents or alterations; nor
the costs for transport.
We reserve the right to reject any claim where the purchase cannot be verified or when it is
clear that the product has not been properly maintained. (Clean ventilation slots, carbon
