that may affect proper operation. Any part that is damaged should be properly
repaired or replaced by an authorized service center unless otherwise indicated
elsewhere in the instruction manual.
10.
REPLACEMENT PARTS AND ACCESSORIES.
When servicing, use only
identical replacement parts. Only use accessories intended for use with this tool.
11.
DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS.
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
the tool.
12.
Check for shipping damage
. If damage has occurred, a claim must be filed
with carrier. Check for completeness. Immediately report missing parts to dealer.
IMPORTANT:
Rotary machine and dies are coated with a protestant. To ensure
proper fit and operation, remove coating. Coating is easily removed with mild
solvents, such as mineral spirits, and a soft cloth. Avoid getting cleaning solution
on paint or any of the rubber or plastic parts. Solvents may deteriorate these
finishes. Use soap and water on paint, plastic or rubber components. After
cleaning, cover all exposed surfaces with a light coating of oil.
WARNING:
Never use highly Non-flammable solvents are recommended to avoid
possible fire hazard.
SPECIFICATIONS ROTARY MACHINE
Capacity
1.2mm / 18 GA.
Throat depth
457mm / 18”
Packing
73x27x14 cm
Weight
24/26kg
INSTALLATION
Machine should be installed on a level surface, with proper lighting. Machine is to
be bench mounted. Be sure to provide clearance for crank arm rotation. Area
around machine should be clear of scraps, oil or dirt. Apply a suitable non-skid
material to floor.
