background image

VERY IMPORTANT SAFETY CONSIDERATIONS

1- Never install your air conditioner in the bilge or engine room areas.
2- Ensure that the selected location is sealed from direct access to bilge
    and/or engine room vapors.
3- Do NOT terminate condensate drain line within three feet of any 
    outlet of engine or generator’s exhaust systems, nor in an engine or 
    generator’s compartment housing, nor in a bilge, unless the drain is
    connected properly to a sealed condensate or shower sump pump.

SAFETY WARNING

- The a/c unit should never be placed such that it can circulate carbon
  monoxide, fuel vapors or other noxious fumes into the boat’s living 
   spaces.  
- Do not install or operate a self-contained unit in the engine room or
  near an internal combustion engine. Failure to follow this precaution
  could result in serious injury or death.

IGNITION PROTECTION WARNING

- Self-Contained units do NOT meet federal requirements for ignition 
  protection, DO NOT install in spaces containing gasoline engines, tanks,
  LPG/CPG cylinders, regulators, valves or fuel line fi ttings. Failure to 
  comply may result in injury or death.
- Installation and servicing of this system can be hazardous due to system  
  pressure and electrical components. 
- When working on this equipment, always observe precautions 
  described in the literature, tags and labels attached to the unit. 
- Follow all safety codes. Wear safety glasses and work gloves and place
  a fi re extinguisher close to the work area.

Содержание SC4.2

























Отзывы: