mabe PSS21 Series, Руководство по обслуживанию

Страница: 28 / 65

- 26 -
Thermostat Defrosting
The defrost thermostat is pressed to the top of the
evaporator.
The thermostat sends temperature
information to the processor. The defrosting heater must
be replaced when you change the thermostat.
1. Remove the lower fan duct from the evaporator cover.
2. Remove the 1/4 "screws from the evaporator cover
and remove the evaporator cover.
3. Remove the thermostat defrosting
.
Evaporator Thermistor
The evaporator thermistor is pressed in the upper part
of the evaporator. The thermistor sends temperature
signals from the evaporator to the processor. The
thermistor must be replaced when changing the
evaporator fan.
1. Complete the evaporator fan procedure.
2. Release the evaporator thermistor and remove it.
GEA00961
GEA00963
Thermist
or
Tornillos
7. Remove the 1/4 "screw of ground wire from the
evaporator fan.
8. Remove the 1/4 "screws (2) from the
evaporator fan mounting bracket located on each
side of the clamp
9. Remove it
Defrosting Heater
The defrosting heater is located in the lower part of
the evaporator. The defrost heater heats the
evaporator in the defrost operation mode. The
thermostat must be replaced when changing the
defrost heater.
1. Complete the defrosting thermostat procedure.
2. Remove the screws (2) Phillips head mounting
defrosting heater.
3. Remove the defrosting heater
.