16
rinse
1. Place the load into the washing tub. Select the appropriate wash
type according to the load.
2. Adjust the water level and let the water into the tub.
3. Use the WASH TIME selector knob to set a time of to 5-7 minutes
to perform the rinse.
rinsing with stored water
You can repeat the rinse-spin procedure 2-3 times using stored wa-
ter.
1. Place the load into the washing machine. Select the appropriate
wash type according to the load.
2. Fill up water to the preset level.
3. To rinse, adjust the wash timer to 2-3 minutes.
When the load is small, use the LIGHT setting. If you use the NOR-
MAL setting, the water may splash.
spinning
1. Evenly distribute the load into the spin tub.
2. Use the spinning cap to press the load inside the tub. Close the ex-
terior and interior lids of the spin tub.
3. Select an appropriate spinning time according to the condition of
the load.
During the spinning cycle, you may hear abnormal sounds, they are
generally caused by an unbalanced load. Stop the machine and
evenly distribute the load inside the spinning tub.
During the spinning cycle, the machine will pause if the exterior lid
of the spinning tub is opened. Close it to resume the spinning cycle.
important
To run spinning and draining or rinsing with water
filling one after the other, first run the spinning
cycle for around 1 minute, then draining or rinsing
with water filling. Otherwise the spinning will stop
automatically because of the excess water in the
spinning tub.