mabe LMC0686XBBY, Руководство по обслуживанию, Страница: 20 / 36

and then press the “Temp.” and
Front Load Washing Machine
SERVICE MANUAL
9-2. Self check
Self check
1.How to start
2. Test item
Model selection
1.Press the power and extra rinse button and then put the plug in to the socket at the
same
time for 4 seconds, and it will enter the model-se lecton model.
2.The default display shows 08 . Press the program button to choose 00/
till the needed model . Then press the start/pause button and
the mode can be storage. The model can not be changed after storage.
3.If you want to change the model again after storage, you can cut off the NTC and
do the cycle adjustment.
4.Model
，
you should choose 08.
Model
，
you should choose 09.
Model
，
you should choose 12.
5.Press On/Off button gently for 2 seconds to switch off the machine as buttons are
soft touch sensitive.
829 Series
01/02/03/04/05/06/07/08
20
LMC 0686XBBY
LMC 0886XBBY
LMC1086XBBY/
at the same time, then wait for about 3 seconds, the LED will display
” and all the light will light.
Press the "Extra rinse" key once to enter the machine model detection.
Then press the "Extra rinse" key once to enter the version number detecting Haier.
Press the “Power” button, the LED will light,
“Delay” button
“
1). Press the "Extra rinse" the third time to enter "
" sensor mode. If the problem,
the water level sensor alarm FA, the water level sensor alarm F3.
2). Press the "Extra rinse" the fourth time to enter " " main wash valve detection
mode to observe whether the water tank detergent box water inlet water.
3).Press the "Extra rinse" the fifth time to enter " " softener valve detection mode,
to observe whether the detergent box storage tank at the water inlet.
4). Press the “Extra rinse” the sixth time to enter “
”, the machine test end.
LMC1086XSSY0