Maas KCB-4000, Руководство пользователя

Страница: 5 / 16

■
More Warnings
Read these operating instructions carefully before connecting
or using the radio. Keep the operating instructions for future
reference.
Connect an antenna before using the CB radio. Check the
SWR before transmitting for the first time. Excessive SWR
may cause destruction of internal components, which is not
covered by the warranty.
Be sure to contact an authorised service centre for repairs.
Use a suitable power supply unit for stationary operation.
■ Installation
Choose the most suitable place to install the CB radio in your
vehicle so that you will not be distracted while driving. Use
the supplied bracket and accessories to install the CB radio.
The screws must be tightened firmly to avoid mechanical
vibration of the CB radio while driving. The mounting bracket
can be positioned above or below the CB radio. Depending
on the installation method, it can be tilted.
■ Powering the CB radio
The cable supplied has a fuse located in the plug. To power
the CB radio, plug the connector into the appropriate socket
on the vehicle.
ATTENTION: Check that the on-board voltage is 12-24 V. If
the fuse is blown, do not replace it with a value greater than
2 A.
INSTALLATION
3