Version 5.1
10
_________________________________________________________________________________
_________________________________________________________________________________
10.
The rest of the water in the moistening tank can be sucked out via the suc
tion rubber pear through the ring
-
shaped hole and the moisture basin water
level will slowly go down.
In this way the water compartment is shut off and the
machine parts connected to electric power cannot come
into
contact.
11.
Take out the support pins from the format slide and insert the format slide
in both guides.
4.3 Power supply
The operating voltage required is as specified below:
100...120VAC/60Hz and 200...240VAC/50Hz
The switching power supply has been pre
-
selected by the
factory!
Always take notice of the type plate on the left side of the
Envelope Sealing Machine!
