Scancommander
Scancommander
Scancommander
Scancommander
Scancommander
eMail: [email protected] . Tel.: + 49 9 31 49 79 40 . User's Manual Scancommander
31
31
31
31
31
4.4.1 Changing names and parameters
EDIT button
the LED inside this EDIT button is on as long as the
edit mode is active.
Memory button
Memory name, x-fade time and trigpoint can be set
via keyboard and encoder. Select the next memory or
cancel edit mode by switching off the edit button
(also possible by quit or any direct access.)
Changing the memory parameters only will not recall this memory to stage.
4.4 Modifying of memories
A stored memory contains data for:
- Name, x-fade time and trigpoint
- Matrix with trig/fade marks for the features
- Data for the single channels
All these data can be modified without starting from the very beginning.
Modifying memories,
basic structure
Changing memory
parameters
Modifying single channel
values or the matrix
selection
4.4.2 Changing matrix and data
EDIT button
Memory button
MODIFY button
The selected memory gets recalled to stage and the
block "MODIFY" is displayed inverted.
EDIT MATRIX
Edit Matrix has to be inverted, if the STORE MATRIX
has to be checked or modified within the next steps.
Feature button
SCAN selection
Preset button or Encoder
Channel values can be modified via direct
access.
1.x STORE button
Shows the STORE MATRIX of the selected memory.
Selection of channels and trig/fade marks can be
modified.
2.x STORE button
Saves the modified memory.
The STORE MATRIX of the last modified memory stays in the temporary
storage and will be reconstructed when doing the next store operation.
