1
7. Executor faders
8. Executor buttons 3&4
9. Executor knobs
Connect and Power Up the Device
1. Unpack the device.
2. Remove the packaging and cushioning material.
3. Place the device indoors on a stable surface.
4. Connect external monitors to the console using a native DisplayPort connector.
5. Start the grandMA3 onPC command wing XT:
-Insert the IEC connector into the corresponding jack.
-Connect the power plug.
-Turn on the power switch:
-Set the power switch to position
I
.
-The power switch lights up in red.
-Press the power key on the front panel.
-The device starts booting.
Turn off the grandMA3 onPC command wing XT
Important:
Do not press the power key to turn off the device. Only if a hard shutdown is necessary, press and hold the
power key for more than 3 seconds.
To turn off the grandMA3 onPC command wing XT:
-Tap the
icon at the top of the control bar to begin the shutdown procedure for the console or the onPC application or
shutdown the onPC software by the
.
2