MA lighting Network Switch, Руководство пользователя

Страница: 38 / 73

© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
3. To change the status of the filter (allowed= displayed by a green color) (blocked= displayed by a red color), click
the
preset number
or
preset name
in the header.
Figure 3: Filters Applied
4. Select the filters for the port by clicking. If a preset was assigned to the port, the preset changes to
filters
applied
.
5. Click
Apply settings and stay where you are
or
Apply settings and leave edit
.
The selected filters are applied and saved in the startup configuration. A filter icon is visible right beside the group
name on the front display.
To create new filter, see Create New Filter .
6.3. Create New Presets
You can create up to 24 new presets additional to the 7 predefined presets.
If you need more customized presets than 24, you can delete the 7 predefined presets and create in total 31
customized presets.
A created preset contains the applied filters. If you use the same filter assignment frequently, you should save the
filter assignment as a preset.
Requirement:
Applied Filters to Ports .
Information:
The new preset will be applied for the selected port after saving.
38