C
HAPTER
4: P
ERFORMING
A
DDITIONAL
C
ONFIGURATION
(O
PTIONAL
)
M86 S
ECURITY
SWG S
ETUP
G
UIDE
V
. 10.2
21
disable_service_ssh
Disables the ssh network service. Enter the disable_service_ssh
command.
enable_ ...
Enables the network service. The enable command includes the
enable_service_snmpd
and
enable_service_ssh
commands.
enable_service_snmpd
Enables the snmpd network service. Enter the
enable_service_snmpd command.
enable_service_ssh
Enables the ssh network service. Enter the enable_service_ssh
command.
ethconf
Enables configuring the Network Interface parameters.
Enter the ethconf command and choose the required interface.
Choose the required speed or select Auto-negotiation to enable the
appliance to negotiate its own speed.
Enter the ethconf command and choose the interface, for example,
enter 1 (eth1).
The settings for the selected interface are displayed.
Choose configuration for the adapter and confirm to make the
settings permanent
NOTES:
According to the IEEE 802.3 standard, when working with
1000Base-T at speed of 1000Mbps, auto-negotiation must be
enabled. A fixed speed of 1000Mbps is not supported. For more
information, please refer to the 1000BASE-X Auto- Negotiation
standard as defined in Clause 37 of the IEEE 802.3 standard.
